BOCES

Above, Joshua Roberts, of Attica Central School, races against a clock as he fixes a tire during the Tire Rodeo at the Ron Smith Auto Tech Competition.

Submitted photos and press release:

Each year the Niagara Frontier Automobile Dealers Association hosts a competition that is held at the Erie Community College Vehicle Technology Training Center (ECC-VTTC) in Orchard Park. This event, called the Ron Smith Auto Tech Competition, is open to any high school senior or junior who is enrolled in an automotive program.

The competition draws students from seven Western New York counties. The winners of this contest, along with their high school instructor, receive an all-expense paid trip to New York City to compete in the nationals at the National Automotive Technology Competition.

Six students from the Batavia Career and Technical Education (CTE) Center’s Auto Technology Program competed in this year’s Ron Smith Auto Tech Competition, which was held Friday (Jan. 17).

During this daylong event students, who competed in teams of two, were scored on their knowledge of tools, measuring instruments, specific vehicle components, and job interview skills. Students were also required to diagnose and repair a number of preassigned problems under a car's hood.

During the Tire Rodeo, students were put to the test as they raced to replace a damaged tire in the quickest time.

Seniors Lucas Doran from Alexander Central School and Patrick Willis from Attica Central School took second place in the automotive competition.

John McCarthy from Alexander CS, and Michael Roberts from Attica CS, are both seniors and they also competed in the automotive competition. This team took fourth place and just missed third place by only one point.

Devon Zinter from Byron-Bergen Central School, and Joshua Roberts from Attica CS, are both juniors. This team took second place in the Tire Rodeo.

All four seniors were offered the opportunity for tuition-free enrollment into the two-year Ford Automotive Student Service Education Training(ASSET) Program at Erie Community College.

Lucas and Patrick each received a $750 scholarship to the college of their choice, tool boxes, and an assortment of tools. Mike and John received a $250 college scholarship.

Devon and Joshua won jump boxes and have qualified to return to next year’s competition as seniors to represent the Batavia CTE Center.

Bob Yates is the Auto Technology instructor at the Batavia CTE Center. He noted it’s not always about winning but more importantly, how a competition gives students the opportunity to learn about their skill set and how they can improve.

“All of these students worked hard preparing for the competition both during school as well as over winter break, Yates said. "The seniors spent time at Basil Ford working with a senior technician preparing for the debugging of a 2019 Ford Ranger.

"The second part of the competition was based on a series of stations which we prepare for during class and shop time. I am very proud of the students and the effort they put in.

"I was complimented several times about the professionalism, politeness, and knowledge our students displayed during the competition. They were a great representation of our program and the Batavia CTE Center.”

Below, from left, Bob Yates, Batavia CTE Center Auto Technology Instructor, with Auto Technology students Patrick Willis and Lucas Doran, accept their awards at the Ron Smith Auto Tech Competition.

Submitted photo and information from Genesee Valley Educational Partnership:

Decision Day was held Friday at the Western New York Tech Academy. It is similar to a college signing day.

A total of 10 WNY Tech Academy students were honored for officially declaring the pathways they will pursue as they complete their free applied associate degrees through Genesee Community College.

The students could choose to study Accounting, Food Processing Technology, or Supply Chain Management.

Staff, administrators, business partners and parents attended Decision Day.

The high school juniors who participated are named below, along with their high school and declared paths of study. They are in the top photo.

• Brett Bogardus, of Perry -- Accounting
• Dante Brent, of Attica -- Accounting
• Cameron Durfee, of Attica -- Supply Chain Management
• Nathan Geise, of Warsaw -- Accounting
• Holly Grisewood, of Perry -- Accounting
• Devon Heick, of Byron-Bergen -- Food Processing Technology
• Trevor Pahl, of Pavilion -- Food Processing Technology
• Veronica Shepherd, of Le Roy -- Accounting
• Carl Stachura, Batavia -- Accounting

(Everett Claud, of Perry, is not pictured. He will study Supply Chain Management.)

In addition, the Tech Academy also recognized 12 seniors in Friday's program:

• Collin Aquina, of Oakfield-Alabama -- Supply Chain Management);
• Gabriel Bucknam, of Perry -- Food Processing Technology;
• Stephanie Dibble, of Batavia -- Supply Chain Management;
• Zachary Evert, of Attica -- Supply Chain Management;
• Abigail Hackett, of Pavilion -- Supply Chain Management);
• Evan Harter, of Byron-Bergen -- Accounting;
• Peyton Heesch, of Caledonia-Mumford -- Supply Chain Management;
• Dylan Kipfer, of Attica -- Supply Chain Management;
• Cole Lowery, of Pavilion -- Food Processing Technology;
• Peyton Penders, of Pavilion -- Food Processing Technology;
• Alexis Jade Reed, of Batavia -- Food Processing Technology;
• Jace Hilton Vilinsky, of Avon -- Supply Chain Management.

For more information about the WNY Tech Academy visit wnytechacademy.org

About Western New York Tech Academy

It is a program of the Genesee Valley Educational Partnership. The Partnership operates as a Board of Cooperative Educational Services offering shared programs and services to 22 component school districts located in Genesee, Wyoming, Livingston and Steuben counties in New York State.

Press release:

Le Roy – Traumatic events can directly impact a student’s ability to learn. The National Survey of Children’s Exposure to Violence found that more than 60 percent of children surveyed experienced some form of trauma, crime, or abuse in the prior year, with some experiencing multiple traumas. This exposure often prevents students from their ability to focus in class, study or can even impair their capability to do well on a test.

The Genesee Valley Educational Partnership has a new Trauma, Illness and Grief (TIG) Service to serve component school districts by delivering training and crisis support that links schools’ vision for trauma-responsive practices to processes for implementing sustainable change.

The service includes crisis training for teams in each school district, crisis response support in the event of a school tragedy, public relations/communications support and regional coordination of services to support students with mental health needs.

The TIG service brings together school districts and mental health providers to create a comprehensive support system in the Genesee Valley region.

The mission of TIG is to maintain and grow a community and school-based consortium of culturally sensitive and clinically appropriate training, support, and resource services to assist schools in responding to the emotional needs of children, teachers, and other school personnel, which arise from trauma, violence, illness, grief and loss.  

The TIG core curriculum prepares schools/districts to respond and intervene effectively during times of crisis and to support resiliency. This shared training assures that any responders are able to effectively and efficiently intervene to support their own district as well as dis­tricts throughout the network.

In the event of a district- or school-wide crisis, school districts can deploy and receive responders from both within and outside of the school in a coordinated and systematic manner through the Back Up Support Network.

Julie Donlon, assistant superintendent for the Genesee Valley Educational Partnership, explains why this service was launched and how it supports component districts.

“Despite our best efforts in taking a proactive approach at protecting our students, staff and communities from trauma, illness, grief and loss, life events happen that impact people in different ways," Donlon said. "The TIG service is designed to create supportive networks that encompass trained professionals to respond effectively in times of crisis.

"GVEP has partnered with Monroe County TIG to serve schools in the Genesee Valley region to ensure our students, staff and community have access to comprehensive support networks during times of tragedy. Through a regional approach, we've partnered with districts and local agencies to build a stronger, more resilient community.

"The service revolves around proactive efforts in planning, preparation and response. Together, we are stronger.”

About GVEP

The Genesee Valley Educational Partnership operates as a Board of Cooperative Educational Services providing shared programs and services to 22 component school districts located in Genesee, Wyoming, Livingston and Steuben counties in New York state.

From left, Bill Hayes, Jon Bigsby, Rich Monroe and in back, Nathan Blowers, Turnbull Operations manager, all gather as Jon accepts Hayes’ offer to enter into Turnbull’s apprentice program.

Submitted photo and press release:

In the school world, June is a time for graduations, celebrations and awards ceremonies. This holds true for Jon Bigsby as June holds special meaning for him; he was offered full-time employment with Turnbull Heating and Air Conditioning.

Jon is a recent graduate of the Building Trades Program at the Batavia Career and Technical (CTE) Education Center. He is set to graduate from Alexander High School on June 27.

His decision to seek employment after high school graduation was easy.

“I like working with my hands and I feel that this is a good choice for me to enter the workforce. I’m honored to be working with Turnbull,” Jon said.

Bill Hayes is the owner of Turnbull Heating and Air Conditioning. In the past, Hayes has hired almost 10 students from the Batavia CTE Center’s Building Trades Program.

“I know that these students have the foundational skills necessary to enter into our training program," Haynes said. "I need skilled workers. The instructors in the Building Trades Program teach the students the importance of quality workmanship and that’s important to me."

Last summer, Jon worked for Turnbull and his work ethic was noticed.

“He listens, is disciplined, he works hard,” Hayes said.

After graduation, Jon will be enrolled in the Turnbull Heating and Air Conditioning 12-month certified apprentice program.

“He’ll learn how to thread pipe to actually doing installations and service calls. He’ll be working in the shop and in the field,” Hayes said.

Rich Monroe is one of the Building Trades Instructors at the Batavia CTE Center. He echoed Hayes thoughts about Jon.

“Jon meets the standards that Turnbull expects," Monroe said. "He is a hands-on learner and he will be embraced here at Turnbull. Jon fits the mold and I know the people here at Turnbull will give him every opportunity to be the best mechanic."

About Turnbull Heating and Air Conditioning

It is a Batavia-based HVAC contractor that offers residential and commercial heating, air-conditioning and commercial refrigeration service, installations, and scheduled maintenance programs.

About the Batavia Career and Technical Education Center

It is a program of the Genesee Valley Educational Partnership (The Partnership). The Partnership operates as a Board of Cooperative Educational Services offering shared programs and services to 22 component school districts located in Genesee, Wyoming, Livingston and Steuben counties in New York State.

On Friday, June 28, Genesee Cancer Assistance will be hosting its 25th Annual Golf & Bocce Tournament at Batavia Country Club.

It is located at 7909 Batavia Byron Road. Golf registration begins at 10:30 a.m. and costs $100 per player. Bocce registration is $60 per player nd starts at 12 p.m. You can also register in advance; online at GeneseeCancerAssistance.org/golf, or call the office at (585) 345-0417.

Golf and Bocce teams will compete for a variety of prizes and awards. A steak dinner and raffles, including a “Dine & Sail” silent auction, will follow the games.

Sponsors are welcome. Seven sponsorship levels with various perks are available. Contact GCA for information.

All proceeds will benefit Genesee Cancer Assistance.

This year's honorary chair person is Bobby Aquino, who has been a dedicated volunteer for GCA since its founding. He has been—and continues to be—an invaluable asset to the GCA team and the patients they serve.

Aquino is an integral contributor to events preparation and setup—always ready to roll up his sleeves and do whatever is needed. Genesee Cancer Assistance is also exceedingly grateful for Aquino's generous financial support.

Genesee Cancer Assistance, cofounded in 1993 by Dorothy Schlaggel and Russ Romano, is a community-based, volunteer organization through which cancer patients and their families living in Genesee County have access to financial aid and a variety of support services.

Since its founding, Genesee Cancer Assistance has been fortunate to aid thousands of individuals; hundreds of patients each year.

For more information:

Genesee Cancer Assistance

127 North St., Batavia, NY 14020

(585) 345-0417

GeneseeCancerAssistance.org

More than 150 students from the Genesee Region schools celebrated their Senior Recognition and Awards Ceremony last evening at Le Roy Senior High School from the Career and the Technical Education Center, Batavia Campus.

Thirteen students will be going into various military duties and continuing their education.

Certificates were distributed to students who completed course requirements in Animal Sciences, Building, Auto and Metal Trades, Conservation, Cosmetology, Criminal Justice, Culinary and Graphic arts, Health careers and much more. 

Special awards for perfect attendance, student of the year and monetary scholarships were presented.

To view or purchase photos, click here.

On Friday, the students in the Culinary Arts Program prepared their final projects for a group of judges. I happened to arrive in time for the last student of the day, Jose Vanegas, who made tacos and flan.

(Above, Hannah Tiede, Batavia, with instructor Bob Yates, and her new boss, Darryl Horzempa, of Stan's Harley-Davidson, where she interned and will work after graduation, and her parents, Meghan and Rich Tiede.)

When sports stars sign letters of intent to attend a university, the schools' athletic directors invite the media to cover the letter-of-intent signing but students moving onto careers rarely get the same attention.

Batavia CTE/BOCES corrected that oversight earlier this week by holding its first-ever signing day with three students who graduate this spring with jobs in their chosen careers already in place.

"As many of you know, we’re at a critical shortage of skilled workers these days," said Principal Jon Sanfratello. "There are many different avenues that kids have today, whether it’s going through school onto college or technical school or straight out into the workforce.

"And so we try to provide those opportunities for kids each and every day, so we have three great stories of these hard-working seniors who are going to go straight out into the workforce."

Hannah Teide, of Batavia, will be working at Stan’s Harley-Davidson in Batavia.

"When she first started coming into our shop I thought she was already friends with all of our employees," Horzempa said. "I thought if she's that enthusiastic about working in our shop, maybe I should give her a try and she's been that enthusiastic ever since."

(Above, from left are Todd Sloat, his parents, Rebecca and Richard Day, Bob Yates, and Jon Sanfratello.)

Jake Day signed with Sloat Tire. 

"Jacob approached and said he would like to stay and we were already thinking, 'what are you doing this summer?' " said Todd Sloat, owner of Sloat Tire, and a former BOCES student himself. "It worked out that we asked him to stay. It worked out and that's why we're here today."

(Above Jenna Montgomery signs with The Exchange in Attica with her are, from left: Renee Ackert, owner of The Exchange; Jenna’s father, Jim Montgomery; Jon Sanfratello; Jenna’s mother, Bethany Montgomery; and cosmetology teacher Mary Beswick.)

Jenna Montgomery signed with The Exchange in Attica. Beswick said what turned Montgomery around was a student was her internship at The Exchange, where she really started to shine and that carried over into her course work.

"She's so talented in what she loves to do," Ackert said. "She's fit in wonderfully at the salon."

By the end of July, Robert and Kimberly Maerten, along with their three young children, hope to move into their new home on Pike Road in Alexander built by the Building Trades program students at Batavia CTE/BOCES. 

Maerten is himself a graduate of the program.

Photo, front row: Kyra Konopski (kneeling) and Mia Hampton; back row: Shelby Bridge, Brianna Gilliat, Faith Jones and Danielle Mason.

Submitted photo and press release:

Batavia Career and Technical Education Center (CTE) students recently attended the New York State HOSA (Health Occupations Students of America) Leadership Conference, which was held in Syracuse earlier this month.

Six Health Dimensions students participated in this event, which included more than 300 students who represented New York State schools and BOCES. As a result of this competition, five of the students qualified to attend the 42nd annual national HOSA Conference, which will be held in Orlando, Fla., in June.

The students, their competitions, and their placements are:

• Kyra Konopski, a junior from Le Roy CS – two awards -- First Place in Nutrition; Second Place -- Healthy Living
• Shelby Bridge, a junior from Byron-Bergen CS – Second Place -- Personal Skills
• Brianna Gilliat, a senior from Elba CS – Third Place -- Healthy Living
• Mia Hampton, a junior from Le Roy CS – Third Place -- Home Health Aid
• Faith Jones, a senior from Caledonia-Mumford CS -- Third Place -- Personal Skills​

The Health Dimensions Program is offered at the Batavia CTE Center. Health Dimensions students engage in a challenging hands-on approach in the health care field. Participants experience and provide the "human side" of client care at local health care facilities.

All Health Dimensions students spend time in local facilities working collaboratively with staff members, residents, and patients. Students may choose to shadow medical professionals from many disciplines.

About the Batavia Career and Technical Education Center

It's a program of the Genesee Valley Educational Partnership. The Partnership operates as a Board of Cooperative Educational Services offering shared programs and services to 22 component school districts located in Genesee, Wyoming, Livingston and Steuben counties in New York State.  

The district superintendent for BOCES says a student complaint about an instructor with an unauthorized pocketknife on campus was taken seriously and dealt with promptly after the student contacted The Batavian to complain about what she perceived as an inadequate response.

Kevin MacDonald said as soon as the Batavia principal was contacted by the student the situation was dealt with and that the instructor involved felt "horrible" about the mistake. The pocketknife is something she normally carries with her off campus and forgot it was clipped on the pocket of her utility pants, making it clearly visible to students.

The student who contacted The Batavian said she was concerned the issue hadn't been dealt with and MacDonald suggested the student wasn't aware of what went on after she spoke with a principal.

While sharp objects -- knives, saws, scissors, and other items -- are part of the instructional environment on the Batavia CTE campus, neither students nor faculty are allowed to bring knives onto campus.

The parents of three students who expressed concern about the knife were contacted by phone by school officials, MacDonald said.

"I'm confident our staff handled the situation very well," MacDonald said.

Here is a statement from District Superintendent Kevin MacDonald:

On Wednesday, March 20, a student who attends the Batavia Career and Technical Education Center, reported that an instructor was carrying a knife that was visible to students.

Administration was notified of the report and the student’s concerns. A conversation was had with the instructor who was carrying a knife. She immediately removed the knife from the building. She apologized noting that it was an honest mistake. Administration met with the student who reported the incident. Parents were notified of the situation that occurred.

The Genesee Valley Educational Partnership has a board policy that states that weapons are not allowed on campuses, however, the policy does note that tools and other equipment, like knives and scissors, are allowed as long as the implement is part of the approved career and technical education program. The welfare of our students is of utmost importance and we take reports like this seriously.

Students of the culinary program at Batavia CTE on Thursday presented dishes they created with the goal of cooking up something suitable for astronauts in space to a panel of judges to see if their creations might be worthy of a nationwide competition in Houston later this year.

Six students, three from Batavia and three from Mount Morris, prepared two dishes -- asparagus "fries" from Batavia and berry quinoa salad.

The dishes were scored on presentation, nutritional value and taste. The final dishes will also need to be suitable for freeze-drying to take into space.

Travis Barlow, Kevin Balkota, John Steward, Danielle Rotondo, Patrick Rae, and Darly Pochan.

Nancy Hall from NASA was also on hand to observe and advise during the competition.

There is no winner from yesterday. Both teams will have their scores presented to a panel who will select 10 teams from entries from around the nation to travel to Houston for the final competition.

Students from Batavia were Melissa Voltura, Jose Vanegas and Jason Lowe. Students from Mount Morris were Sam Meyers, Tony Uveino and Mackenzie Wheeler.

Submitted photo and press release:

Karl Steffenilla, a Batavia Career and Technical Education (CTE) Center student enrolled in the Building Trades Program, was recently awarded a $500 School-to-Work scholarship from the Electrical Association, a Rochester-based nonprofit dedicated to promoting the electrical trades. Karl is a senior from Pavilion Central schools.

Rich Monroe, Batavia CTE Center Building Trades instructor, described Karl as "an extremely dedicated and dependable student who is detail-orientated and eager to learn." 

After graduation, Karl's plans include applying to IBEW Local 86, the local Electricians' Union.

"I'm honored to receive this scholarship," Karl said. 

In photo, from left, are: Rich Monroe, Karl Steffenilla, Jon Sanfratello, executive principal, and Catherine Bennett, assistant principal.

About the CTE Center

The Batavia Morris Career and Technical Education Center, located in Batavia, is a program of the Genesee Valley Educational Partnership. The Partnership operates as a Board of Cooperative Educational Services offering shared programs and services to 22 component school districts located in Genesee, Wyoming, Livingston and Steuben counties in New York state.

A new partnership with the Batavia Career and Technical Education Center (BOCES) and Cornell University is paving the way for students interested in a career in precision machining.

The unique program, which is the only such partnership in the nation, allows students to study realistic particle accelerator hardware designs and fabricate hardware based on those designs, said Maggie Fitzgibbon, head of public relations at Genesee Valley Educational Partnership.

“Within the next several years, the Cornell-BNL Energy Recovery Linacs Test Accelerator at the Cornell Laboratory for Accelerator-based Sciences and Education (CLASSE) will develop into a powerhouse of accelerator physics and technology and will be one of the most advanced in the world,” said Lora K. Gruber-Hine, director of Education and Outreach Programs at the Cornell laboratory.

“The building of ERL will require the cultivation of local talent and a highly trained workforce. When this prototype ERL is complete and expanded upon, it will be a critical resource to New York State, the nation and the world, propelling science, biomedical advancement and economic development.”

Tim Gleba, precision machining instructor, was instrumental in development of the new partnership. After watching a video on the Cornell High Energy Synchrotron Source Facebook page explaining how machinists work to create parts for the particle accelerator at Cornell, he was intrigued and thought this could possibly be a project for his students.

He pitched his idea to Cornell and a meeting last summer resulted in development of a project plan for this school year.

Batavia CTE’s precision machining students are now creating 150 parts for Cornell’s particle accelerator. These include adjustment plates and brackets, as well as a short dipole spacer bar. These parts are used to align magnets within a tolerance of .004 inches, Gleba said.

“This partnership is a wonderful opportunity for these high school students,” Gleba said. “They are able to work with Cornell’s engineers, physicists and machinists.”

Development of the partnership adds a whole inventive aspect to the precision machining curriculum and provides students with relevant work experience, Gleba added.

“Our machine shop and Cornell’s are virtually the same,” he said. “Cornell has the identical machines as us and also uses the same software as what we have in our Precision Machine Shop here in Batavia.”

Students recently toured the Wilson Synchrotron Laboratory at Cornell to kick off the new partnership, according to Fitzgibbon.

Gruber-Hine said they want to showcase the partnership and the new technologies being developed.

She and Gleba both commented on the shortage of trained employees in the precision-machining industry.

“Our lab has been sensitized to the shortage, and as we are growing, the need for skilled labor becomes more evident," Gruber-Hine said. “We realize the need to cultivate a relationship with institutions that train skilled professionals to fill this middle skills gap. When Tim watched our video, he wanted to form a relationship with our laboratory that would allow his students to work on meaningful machining products and contribute to the work being done here.”

“Within the next five years, it is anticipated 50 percent of the precision machining workforce will be retiring, leaving an incredible gap,” Gleba said.

The Precision Machining class at Batavia BOCES had been discontinued for several years, after longtime instructor David O’Geen retired, Fitzgibbon said. But when several high school students expressed an interest in the field, Gleba was hired three years ago in an effort to resurrect the program.

Four of those students are Ayden Odachowski, James Roggow, Benjamin LaBombard and Evan Bartz.

Bartz said he wanted to get into machining because he knew the field was exploding.

Bartz and Roggow worked together to create a process to machine both sides of spacer bars.

Jon Sanfratello, executive principal of the Batavia campus, which includes the Batavia CTE Center, commented on how this partnership provides students with the chance to learn advanced manufacturing skills. The Precision Machining Program is currently affiliated with the National Aeronautics and Space Administration’s HUNCH program. Along with manufacturing hardware for Space X-10, students learn how to inspect and analyze the parts to meet the expert standards set forth by NASA.

“We pride ourselves in offering innovative programs that give our students real-world applicable learning opportunities,” Sanfratello said. “In this new partnership with CLASSE, our students will study cutting-edge designs, learn modern manufacturing methods so they are equipped to succeed in the 21st century workforce.”

“The goal of this partnership is to inspire the next generation of machinists and trades professionals by providing educational opportunities for students to work in concert with engineers and technical directors,” Gruber-Hine added.

Top photo: Tim Gleba, right, instructor in the Precision Machining Program at Batavia Career and Technical Education Center, and student James Roggow show some of the parts the class is making for the particle accelerator at Cornell University.

Above, four of the students in the Precision Machining Program at Batavia Career and Technical Education Center are, from left, Ayden Odachowski, James Roggow, Benjaming LaBombard and Evan Bartz. The Center is engaged in a partnership with Cornell University’s lab to make parts for the college’s particle accelerator. This is the first such partnership in the nation with high school students.

Tim Gleba, instructor in the Precision Machining program at the Batavia Career and Technical Education Center, holds one of parts made by high school students in his class in a one-of-a-kind partnership with Cornell University. Gleba was hired three years to train precision machinists, which are in dire need throughout the area. Gleba said Cornell and industry in the region will be looking to hire 100 precision machinists within the next five years.

This is an example of the parts machined by students at the Batavia Career and Technical Education Center. The program was revived three years ago to train precision machinists for the industry.

Press release:

Providing students with authentic learning experiences is the goal of every career and technical education program. Students in the Conservation Program at the Batavia Career and Technical Education Center got just that opportunity when they constructed a kiosk for the Town of Bergen.

Despite the rainy, cold weather and muddy grounds, the Conservation students built a kiosk that has a roof, two benches and an information board. This project can be found in the Town of Bergen’s Drew’s Nature Center, located on West Sweden Road.

Ernest Haywood is the supervisor for the Town of Bergen. He contacted Jon Sanfratello, executive principal of the Batavia Campus, which includes the Batavia Career and Technical Education Center, to inquire about the possibility of constructing the kiosk.

“I thought the opportunity to build a kiosk for the nature center would foster the students understanding and appreciation of our natural resources as well as provide students a real-life experience to build something that would benefit the community for years to come,” Haywood said.

“It is my hope that the kiosk will provide information for community members to enhance their knowledge of what the Drew's Nature Center has to offer and directions and guidance to visitors on how to independently explore, at one’s own pace, the natural wonders of the center.”

Sanfratello echoed Haywood's thoughts.

“This project gave the students the opportunity to understand the importance of time management, and customer satisfaction all while using the skills learned in the classroom and shop," Sanfratello said. "They worked under some difficult weather conditions but they got the job done."

Jacob Vandenbosch is the Conservation Program instructor.

“The Conservation students were able to learn carpentry skills by creating a location for the community to enjoy the outdoors. As an added bonus, they learned the importance of giving back to the community,” Vandenbosch said. “We will also be exploring future class projects at the nature center and working alongside the town to improve the community’s experience."

Submitted photo: The Conservation a.m. session class with their completed project. Not in order of photo. Ali Mann, Peyton Armison, Andrew Clark, Chad Green, Evan Hands, Mitchell Humel, Dominic Ianni, Kristofer Kuszlyk, Breanna Mest, Adam Offen, Noah Pangrazio, Tristan Rasmussen, Kaitlyn Shultz, Alec Slepinski, Nathan Tabor, Hunter Wade, Tyler Will.

Terry Thompson and Becky Marsh, of Mercy Flight/Mercy EMS, talk about a career as a paramedic to a group of 10th-graders from throughout the region as part of the 10th Grade Career Day at Genesee Community College, sponsored by Batavia and Mount Morris CTE.

Throughout the morning, students rotated among a couple of dozen classrooms led by speakers from the local community representing various career fields including environmental science, cosmetology, educational administration, media and communications, the military, border protection, and nursing, among other fields.

More than 450 students from GLOW along with Steuben County participated.

Chris Suozzi, vice president of business development, Genesee County Economic Development Center, was the keynote speaker to kick things off in the morning.

Press release:

When Jeff Fronk was approached by a member of the Conesus Fire Department regarding a project, he never thought that the venture would take on a life of its own. Fronk is the Collision, Custom, and Restoration (CCR) instructor at the Batavia Career and Technical Education (CTE) Center. 

Dale Eddy is the assistant fire chief and vice president for the Conesus Fire Department. He contacted Fronk last spring with the hopes of having the CCR students work on a 1934 Dodge firetruck that was in dire need of repair.

“The truck had been stored since the '70s when it was put out of commission. It was in very bad shape, even trees were growing out of it,” Eddy said. “We contacted Jeff and hoped he would be willing to take on this project. He showed great interest because he saw the potential for the truck. We were hopeful that he could complete the extensive overhaul that the truck needed.”

“I knew this would be a big undertaking because the truck was in such disrepair,” Fronk said. “It had sat idle for many years; there were parts and pieces missing.”

Fronk inspected the truck and decided to tackle the project. Fronk and the CCR students delved into restoration and uncovered how much work that the truck required. Learning the scope of the work needed, Fronk called upon some of the other Batavia CTE instructors for their assistance, as well.

“The Conservation students milled the wood for the truck bed flooring, and then pre-drilled these oak planks for installation, the Welding students fabricated the side panels and fenders,” Fronk explained. “My CCR students repaired the body pieces that were salvageable, sandblasted the exterior, then primed and painted the exterior. The students even polished the brass bell that’s on the front of the truck.”

Due to a Conesus Fire Department event, the project was under a tight deadline. The entire restoration took place within a four-month period so the firetruck could be used during the summer months. When school ended in June, the truck was not fully completed, so Fronk, along with the help of some fellow CTE teachers, completed the project.

Eddy and the other fire department members were in total awe of the project when the truck was delivered to the fire department in July.

“I knew this was a project that the students could take on," Eddy said. "I completed the Auto Technology Program at the Mount Morris Center, so I’m a BOCES graduate.

"But when all of us saw the finished truck, we were amazed at the quality of the work that the students and instructors completed. That truck was, and still is, smiling from fender to fender.”

The finished truck was recently displayed at the Batavia CTE Center so the students could view their work. Fronk noted how students reacted to seeing the restored truck.

“When the students saw the truck, their jaws dropped and eyes were so big; they were in disbelief! They are so proud of their work,” Fronk said. “This was an incredible project for the students to complete. I’m sure that they will never see a project like this again; I know that I never will!”

The truck is now showcased at the Conesus Fire Department and is used for special community events.

Sara Menke, of Caledonia, a student at Batavia CTE in the Animal Science program, explains to her parents, Linda and Jason, how she cares for a French agora rabbit in her class during an open house Thursday night.

The annual open house is a chance for parents and the community to see what students are learning at the school and what programs are available to career-minded students.

Press release:

Crime scene analysis, 3-D printing processes, welding applications, animal care methods, and the newest cosmetology trends are just a few of the practices students learn at the Batavia Career and Technical Education Center (CTE). The Batavia CTE Center will hold an Open House from 5 to 7 p.m. on Thursday, Nov. 1.

Students, parents and community members are invited to tour the center and discover the many skilled trades opportunities available at this facility. 

All programs housed at this campus will also be open for tours, including the Batavia Academy, the Intensive Therapeutic Program, the Transition and Practical Assessment Exploration Systems Programs, and other school-age special education programs.

This event is open to the public. The Batavia CTE Center is located at 8250 State Street Road, Batavia. Please call (585) 344-7711 with any questions.

About Batavia CTE Center

The Batavia Career and Technical Education Center is a program of the Genesee Valley Educational Partnership.  The Partnership operates as a Board of Cooperative Educational Services providing shared programs and services to 22 component school districts located in Genesee, Wyoming, Livingston and Steuben counties in New York state.